SPE 16ES - SHOT BLASTER

SHOT BLASTING MACHINES – WALK BEHIND HORIZONTAL

SPE16 Main
SPE 16E Shot Blaster
SPE 16E Shot Blaster
SPE 16E Shot Blaster

The SPE 16ES shot blasting machine for the professional contractor

The seal system feature as with all other machines can be varied to blast clean from 2″ up to 16″ wide for inspection of weld seams or line removal. Self propelled and infinitely variable in all operations. Can be dismantled to pass through 600mm access holes in storage tanks. Recognised in industry as the modern, fast, versatile, environmental dust free means to dry abrasive cleaning and texturing of horizontal or slightly inclined surfaces. This eliminates mess normally associated with hand blasting and leaves an ideal surface for coatings and overlays to be applied. Abrasive and debris is contained to prevent hazardous working and environmental pollution.

Typical Applications

  • Removal of old coatings
  • Cleaning concrete and tiles
  • Exposing aggregates
  • Providing non-slip surfaces
  • Removing rubber deposits
  • Steel preparation to SA3 standard
  • Laitance removal on new concrete floors
  • Multi-storey car parks
  • Shopping precincts
  • Food processing plants
  • Storage tanks roofs and floors
  • Ships decks
  • Steel plates
  • Ro-Ro bridges
  • Ferries

Features

  • Blast unit constructed of manganese steel
  • Dust collector fitted with integral compressor and reverse air jet pulsation system to allow continuous working
  • Drive wheels are within the width of the blast cabinet
  • Blasting width can be reduced for line removal and weld inspection
  • Self propelled variable speed drive allows complete operator control
  • Grill fitted into lower separator hopper unit assembly to eliminate foreign objects being allowed into the blastwheel causing damage
  • Capable of using up to S550 abrasive
  • Fully machined blastwheel support bearing assembly (eliminates bearing problems and automatically self-aligns blastwheel components)
  • Blastwheel can be rotated in both directions
  • Can be dismantled to pass through a 600mm (23.6”) access hole in storage tanks

TECHNICAL SPECS

SPE 16ES

Part No.

SPE 16ES


Voltage

400V/460V


Phase

Three


Blast Motor Output

15hp/20hp (11kW/15kW)


Cycles

50/60Hz


Cleaning Width

16″ (406mm)


Length

49.2″ (1250mm)


Width

20.1″ (510mm)


Height

49.2″ (1250mm)


Weight

882lbs (400kg)


SPE 16DC

Part No.

SPE 16DC


Type

Electric 3 Phase


Voltage

400/460V


Cycles

50/60Hz


Length

68.1″ (1730mm)


Width

40.6″ (1030mm)


Height

63″ (1600mm)


Weight

882lbs (400kg)


CONSUMABLES

08002/16 SPE 16E Control Cage
08002/16 SPE 16E Control Cage
08003/16 SPE 16E Impellor
08003/16 SPE 16E Impellor
16/08001 SPE 16E Blastwheel Blades
16/08001 SPE 16E Blastwheel Blades
16/08008 SPE 16E Right Hand Side Liner
16/08008 SPE 16E Right Hand Side Liner
16/08009 SPE 16E Left Hand Side Liner
16/08009 SPE 16E Left Hand Side Liner
16/08010 SPE 16E Hood Liner
16/08010 SPE 16E Hood Liner